Related Manuals for Honeywell PRO22ENC2
Summary of Contents for Honeywell PRO22ENC2
-
Page 1: Installation Manual
PRO-2200 Enclosure Installation Manual Part Number: PRO22ENC1 PRO22ENC2 TD1138 rev0801... -
Page 2: Table Of Contents
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Contents Warnings and Cautions ..................4 Disclaimer ......................6 Product Liability; Mutual Indemnification..............6 Unpacking Procedure ................... 6 CAUTION ......................6 Shipping Instructions .................... 7 Limited Warranty ....................7 Confidentiality ..................... 8 PRO-2200 Enclosure ..................9 Description ...................... -
Page 3: Warnings And Cautions
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Warnings and Cautions WARNING Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power supply, verify that the output voltage is within specifications of the power supply. - Page 4 PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide CAUTION If any damage to the shipment is noticed, a claim must be filed with the responsible commercial carrier. CAUTION Electro-static discharge can damage CMOS integrated circuits and modules. To prevent damage always follow these procedures: Use static shield packaging and containers to transport all electronic components, including completed reader assemblies.
-
Page 5: Disclaimer
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Disclaimer Product Liability; Mutual Indemnification In the event that a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to property of others, Customer shall immediately notify Engineered Systems in writing of all such claims. -
Page 6: Shipping Instructions
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Shipping Instructions To ship equipment back to Engineered Systems: 1. Contact the customer service department before returning equipment at 800-323-4576. Please have the following available when calling: • A description of the problem or reason for returning the equipment. -
Page 7: Confidentiality
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Confidentiality All software, drawings, diagrams, specifications, catalogs, literature, manuals and other materials furnished by Engineered Systems relating to the design, use and service of Products shall remain confidential and shall constitute proprietary rights of Engineered Systems, and Customer agrees to treat such information as confidential. -
Page 8: Pro-2200 Enclosure
Description The PRO-2200 system is designed for maximum efficient use of wall space through the use of a secure metal cabinet (PRO22ENC1/PRO22ENC2) that can hold up to nine modules, a 4 amp power supply (PRO22E1PS) and a self-contained replaceable backup battery. -
Page 9: Dimensions
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Dimensions ENC1 ENC2 Height: 13.9" [0.353 m] 13.9" [0.353 m] Width: 17" [0.4318 m] 18.9" [0.48006 m] Depth: 9" [0.2286 m] 9" [0.2286 m] Metal thickness: .05" [1.27 mm] Color: Autumn White Installation holes: Four hangers in a rectangular pattern 12.1” [0.30734 m] H x 16"... -
Page 10: Installation Diagram
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide 7. The remainder of the panels can be manually wired for power and RS-485 communications using 18 AWG wire. The wires will be daisy-chained from one panel to the next so the power and the communications are wired in parallel. PRO22DCC is available as an option to be purchased with the equipment. -
Page 11: Ul1076 Setup
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide UL1076 Setup PC Minimum Requirements Two required: • 500 Mhz • 128Mb RAM • 9.1Gb hard drive • CD ROM • 10/100 TX network card • 17” SVGA Monitor Peripheral Hardware Requirements • UL approved network HUB with at least 4 ports. -
Page 12: Other Ul1076 Notes
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide 4. Watchman tour 5. Fire alarm supervision (N/A) WIN PAK PRO is not certified for fire alarm supervision 6. Burglar alarm supervision 7. Industrial supervision 8. Other supervisory services NOTE: 2 and 3 may have equal priority: 5 and 6 may have equal priority &... -
Page 13: Second Pc Installation
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide 7. Use the Query Analyzer to connect to the WIN-PAK PRO database using the provided script for attachment. 8. Open up the ODBC application in the Control Panel and create a link to the WIN-PAK PRO SQL database. -
Page 14: Pre-Redundancy Verification
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide 6. Click Next. Change the Server to match the name of the LOCAL PC. The database should be selected as WIN-PAK PRO from that Server. (The destination database). 7. Click Next. Select Transfer objects and data between SQL Server 7.0 database. -
Page 15: Redundant Test Examples
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Redundant Test Examples NOTE: Stop watch needed for all three test examples. Example #1 1. Use the MAIN PC’s OFF button to shut it down. Turn on the REDUNDANT PC and start the stop watch. -
Page 16: Dimensions
Relief (non-power limited) Wire Strap Green Lead (from Enclosure to Door) To Battery Enclosure with 40AH Battery Installation Diagram AL400ULX Assembly diagram for use with the PRO22ENC1 and PRO22ENC2 for UL1076 Dimensions 1.3" .875" 1.22" 1.22" (2.22cm) (3.3cm) (3.1cm) (3.09cm) -
Page 17: Installation Instructions
10. Wire the tamper switch, AC Fail and Battery Fail to assigned inputs. 11. Wire the PRO22ENC1 or PRO22ENC2 tamper switch to the tamper input located on the first panel on the right. 12. The remainder of the panels can be manually wired for power and RS-485 communica- tions using 18 AWG wire. -
Page 18: Cable Specifications
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide Cable Specifications Application ESG Part No. Description Max. Dist. Imp. Cap. N-485 connections* NC2442-TN Belden 9842 4000' (1200 m) 12.8pf/ft or equivalent CR-1, TR-1, CI-1, KR-1 NC1861-BL 6 conductor shielded 500' (152 m) -
Page 19: Esg Cable Part Numbers
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide ESG Cable Part Numbers Part Number Description Application Length NC1841-GY 18 AWG/4 conductor reader cable 1,000' [305 m] NC1861-BL-500 18 AWG/6 conductor reader cable 500' [152 m] NC1861-BL 18 AWG/6 conductor reader cable... -
Page 20: Notes
PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide NOTES... - Page 21 PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide NOTES...
- Page 22 PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2 Installation Guide...
- Page 23 Honeywell Security & Data Collection 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 (800) 675-3364 www.honeywellaccess.com...