Honeywell Integrated Security. All other product and brand names are the service marks, trademarks, registered trademarks, or registered service marks of their respective owners. Printed in the United States of America. Honeywell reserves the right to change any information in this document at any time without prior notice.
DO NOT ACCEPT VERBAL APPROVALS, THEY ARE NOT VALID. Honeywell never recommends using the PW-5000 or related products as a primary warning or monitoring system. Primary warning or monitoring systems should always meet local fire and safety code requirements. The installer must also test the system on a regular basis by instructing the end user in appropriate daily testing procedures.
Copyright laws of the United States protect all information in this document or in the software product itself. Any use of this product is subject to the terms and acceptance of the Honeywell Note: Software Agreement. Please request a copy from Honeywell (http://www.honeywellaccess.com/index.html), and review the agreement carefully.
If a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to the property of others, Customer shall immediately notify Honeywell in writing of all such claims. Honeywell shall defend or settle such claims and shall indemnify and hold Customer harmless for any costs or damages including reasonable attorneys’...
All Products sold or licensed by Honeywell include a warranty registration card which must be completed and returned to Honeywell by or on behalf of the end user in order for Honeywell to provide warranty service, repair, credit or exchange. All...
Notices throughout the term of this Agreement and thereafter unless specifically waived by Honeywell in writing. Other Notices Indoor Use This product is intended to be installed indoor, within the protected premises. Invalidation This product's compliance to ULC-S319, Electronic Access Control Systems, will be...
The PW5K2ENC1/PW5K2ENC2/PW5K2ENC1E/PW5K2ENC2E can be configured in any combination of the PW3K1IC, PW5K1IC, PW6K1IC, PW5K1IN, PW5K1OUT, PW5K1R2, PW6K1IN, PW6K1OUT, PW6K1R2 and PW5K1R1. An www.honeywell.com...
PW-5000 Enclosure optional daisy chain cable (PW5K1DCC) provides an RS-485 communication and power bus between the nine modules. The following assemblies have not been evaluated by UL for use in combination Note: with the PW6K assemblies for ULC installations: PW3K1IC, PW5K1IC, , PW5K1IN, PW5K1OUT, PW5K1R2, PW5K1R1.
Page 11
(sold separately). After all wiring is complete, place the module retainer in the bottom of the enclosure between the modules and the door. The device should fit snugly into the space in front of the modules while allowing the door to close normally. www.honeywell.com...
Page 12
PW-5000 Enclosure 9. Secure battery (for UL s-319 installations only). In order to maintain UL S-319 compliance the battery must be secured to the top of the card cage using hook and loop straps (1/2" by 20" straps). Step 1 -- Weave Velcro straps through slots in “belt-loop” fashion, as shown in the below photo: Step 2 -- Insert battery over the Velcro straps and fasten the Velcro as tightly as possible, as shown in the below photo:...
Need help?
Do you have a question about the Pro-Watch 5000 and is the answer not in the manual?
Questions and answers