A&D AD-4212A-100 Instruction Manual page 47

Note
The upper/lower limit values can be confirmed by external commands using the RS-232C serial
interface.
e.g., Command
Response
Command
Response
Command
Response
Command
Response
Adding the comparison results (AD-4212A only)
To add the comparison results to the output data, set "Comparison results (Cp-r)" parameter of the
function table to "1".
ST, H H , 110.0000
ST, HI, +090.0000
ST, OK, +070.0000
ST, LO, +050.0000
ST, LL,+030.0000
ST, - -,+000.0000
Notes
Select A&D standard format. Set "Data format (type)" parameter of the function table to "0".
The comparison results can not be added to the weighing data stored in memory.
?HH
HH, +100.00000
?HI
HI +080.00000
?LO
LO, +060.00000
?LL
LL, +040.00000
indicates a space (20h)
g HH (Only when OP-04 is installed.)
g HI
g OK
g LO
g LL (Only when OP-04 is installed.)
g No comparison when unstable or near zero
indicates a space (20h)
(to confirm secondary upper limit value)
g (secondary upper limit value=100.00000 g)
(to confirm upper limit value)
g (upper limit value=80.00000 g)
(to confirm lower limit value)
g (lower limit value=60.00000 g)
(to confirm secondary lower limit value)
g (secondary lower limit value=40.00000 g)
45