Displaying Router Settings - 3Com 9000 SX User Manual

8-12 C 8: IP U
HAPTER
Displaying Router
Settings
Table 8-5 Router Show Commands
Command
show ip config {vlan <name> | all}
show ip stats {vlan [<name> | all]}
show iparp {<ipaddress | vlan <name>
| all | permanent}
show ipfdb {<ipaddress> <netmask> |
vlan <name> | all}
show iproute vlan {<name> | all |
permanent | <ipaddress> <netmask>}
show rip {vlan <name> | all}
(continued)
R
NICAST OUTING
To display settings for various IP routing components, use the
commands listed in Table 8-5.
Description
Displays configuration information for one or more VLANs,
including the following:
IP address, subnet mask
IP forwarding information
BOOTP configuration
VLAN name, VLANid
Global ICMP configuration
Global router advertisement configuration
Displays IP statistics for the CPU of the Switch.
Displays the IP Address Resolution Protocol (ARP) table. You
can filter the display by IP address, VLAN, or permanent
entries. Each entry displayed includes the following:
IP address
MAC address
Aging timer value
VLAN name, VLANid, and port number
Flags
Displays the contents of the IP forwarding database table.
Used for technical support purposes.
Displays the contents of the IP routing table.
Displays RIP configuration and statistics for one or more
VLANs. Display includes the state for RIP settings, and
interface states. Statistics include the following:
Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information