Command History Substitution; Common Commands - 3Com 9000 SX User Manual

Table of Contents

Advertisement

Command History
Substitution
Common
Commands
Table 4-3

Common Commands

Command
create account [admin | user] <username>
{<password>}
create vlan <name>
config account <username> {<password>}
config time <time>
config vlan <name> ipaddress <ip_address>
{<mask>}
enable bootp vlan [<name> | all]
clear session <number>
disable bootp vlan [<name> | all]
disable port <portlist>
disable telnet
delete account <username>
delete vlan <name>
logout | quit
(continued)
The Switch 9000 "remembers" the last 50 commands you enter. You
can display a list of these commands by using the following command:
history
Table 4-3 describes common commands used to manage the Switch.
Commands specific to a particular feature are described in the other
chapters of this guide.

Command History Substitution

Description
Allows you to create a user account. For more
information on creating accounts, refer to Chapter 3.
Allows you to create a VLAN. For more information
on VLANs, refer to Chapter 5.
Allows you to configure a user account password.
Allows you to configure the system date and time.
The format for <time> is:
mm/dd/yyyy hh:mm:ss
The time uses a 24 hour clock format.
Allows you to configure an IP address and subnet
mask for a VLAN.
Allows you to enable BOOTP for one or more
VLANs. For more information on using BOOTP, refer
to Chapter 3.
Allows you to terminate a Telnet session from the
Switch.
Allows you to disable BOOTP for one or more VLANs.
Allows you to disable or partition a port.
Allows you to disable Telnet access to the Switch.
Allows you to delete a user account.
Allows you to delete a VLAN.
Allows you to logout of a console or Telnet session. If
used during a Telnet session, also closes the TCP
Telnet session.
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstack ii 9000 sx3c16990

Table of Contents