Status Monitoring - 3Com 9000 SX User Manual

Table 9-1 Switch Monitoring Commands (continued)
Command
show port <portlist> collisions
show port <portlist> config
show port <portlist> errors
show port <portlist> packet
show port <portlist> stats
show port <portlist> util
show protocol {<protocol> | all}
show rip {vlan <name> | all}
show rip stat {vlan <name> | all}
show session
show stpd {<stpd_name> | all}
(continued)
Description
Displays collision statistics for each port.
Displays state, link status, speed, and autonegotiation setting
for each port.
Displays error information for one or more ports.
Displays a histogram of packet statistics for one or more ports.
Displays port information including physical layer
configuration and statistics.
Displays port utilization by percentage, bytes per second, and
packets per second. Use the space bar to toggle between
percentage, bytes per second, and packets per second. Use
the clear counters command to reset values.
Displays protocol information including protocol name,
protocol fields, and the list of VLANs that use this protocol.
Displays RIP configuration and statistics for one or more
VLANs. Display includes the state for RIP settings, and
interface states. Statistics include the following:
Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information
Displays RIP-specific statistics. Statistics include the following
per interface:
Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information
Displays the currently active Telnet and console sessions
communicating with the Switch. Provides the user name, IP
address of the incoming Telnet session, whether a console
session is currently active, and logon time. Sessions are
numbered.
Displays STP information for one or all STP domains.

Status Monitoring

9-3