3Com 9000 SX User Manual page 124

8-14 C 8: IP U
HAPTER
Table 8-6 Router Reset and Disable Commands (continued)
Command
disable rip {vlan <name> | all}
disable rip aggregation
disable rip splithorizon
disable rip poisonreverse
disable rip triggerupdate
disable rip exportstatic
unconfig icmp
unconfig irdp
unconfig rip {vlan <name> | all} Resets all RIP parameters to the default VLAN. Does not change
R
NICAST OUTING
Description
Disables RIP for one or more VLANs. When RIP is disabled, the
parameters are not reset to their defaults, and the states are not
cleared.
Disables RIP for a VLAN causes all routes learned from that VLAN
to be advertised with a GarbageTime metric of 16, before being
deleted from the route table.
Disables the RIP aggregation of subnet information on a RIP
version 2 interface.
Disables split horizon.
Disables poison reverse.
Disables triggered updates.
Disables the filtering of static routes.
Resets all ICMP settings to the default values.
Resets all router advertisement settings to the default values.
the enable/disable state of the RIP settings.