A1.3.4 Effective Print Area - Toshiba B-SV4D Series Owner's Manual

APPENDIX 1 SPECIFICATIONS

A1.3.4 Effective Print Area

The figure below illustrates the relation between the head effective print width and media width.
The figure below shows the effective print area on the media.
1.5mm from the left edge of media
NOTES:
1. Be sure not to print on the 1.5-mm wide area from the media edges (shaded area in the above figure).
2. The centre of media should be positioned at the centre of the print head.
3. Print quality is not guaranteed within 3 mm from the print head stop position (including 1-mm slow-up.)
4. Average print (black) rate should be 15% or less. For bar code print area, the print rate should be 30% or
less.
5. Line weight should be 3 to 12 dots.
Out of print range
Print head element
108.0 mm±0.2mm
(Head Effective Print Range)
2 mm
112.0 mm (Max. media width)
Start line
1mm
Guaranteed print area
1mm
(Backing paper width is not included.)
2 mm
Media width
EA1- 4
ENGLISH VERSION EO1-33061
Out of print range
1.5mm from the right edge of media
Media feed direction
A1.3 Media