Keyswitch Arming; Auto-Arming - Paradox Digiplex DGP2-648 User Manual

5.7 K
EYSWITCH
Your installer can add a keyswitch to arm and disarm your system.
Your installer can program the keyswitch to arm in Regular, Stay,
Force or Instant mode. In addition, the keyswitch can act as a
Maintained or Momentary keyswitch.
5.7.1 M
AINTAINED
To arm the system, place in the "ON" position.
To disarm the system, place in the "OFF" position.
5.7.2 M
OMENTARY KEYSWITCH
To arm the system, place it in the "ON" position briefly then place it
back in the "OFF" position. Repeating this process will disarm the
system.
5.8 A -A
UTO
You can program one or more areas to arm automatically. Ask your
installer for details.
5.8.1 T A
IMED
You can set the time that an area will arm itself automatically.
How do I set the Auto-Arming timer?
1) Enter your [Access Code]. Your keypad will emit a Confirmation
Beep and the A
2) Press the [0] key. Your keypad will emit a Confirmation Beep,
and the P
RG
14 User's Manual
A
RMING
K
EYSWITCH
RMING
-A
UTO RMING
action light will flash.
CCESS
action light and area light(s) will flash.