Connecting Your Dishwasher; Connecting The Faucet Adapter; Connecting To Water And Electrical Supply - Kenmore 665.17799 Use & Care Manual

CONNECTING YOUR
DISHWASHER
Connecting the faucet adapter to faucets with
internal threads
Insert the 2 screens, the thin washer, and then the thick
washer from the faucet adapter kit into the faucet adapter,
Attach the adapter onto the end of the faucet.
NOTE: A special adapter must be installed on the faucet
before the dishwasher can be connected. Complete
Installation Instructions and the adapter are packed with
your dishwasher. See Installation Instructions. When
moving your dishwasher make sure the door is latched.
Hold the dishwasher at the top front corners.
Preparing the faucet
1. Remove the screen holder or aerator, screen, and
washer from the end of the faucet.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher
will be used.
1. (D
3.
1. Washer
2. Screen
3. Screen holder or aerator
NOTE: Remove and save the washer, screen, and screen
holder or aerator for future use.
Connecting the faucet adapter to faucets with
external threads
Insert the two screens and then the thin washer from the
faucet adapter kit into the faucet adapter. Attach the
adapter onto the end of the faucet.
1. Thin washer
2. Screens
3. Faucet adapter
NOTE: Do not use the thick washer.
1. Thick washer
2. Thin washer
3. Screens
4. Faucet adapter
NOTE: Use both washers.
1. Run water at the faucet until it is hot. Turn the water off.
2. Pull the hoses out of their storage compartment on the
back of the dishwasher.
NOTE: Make sure the hoses are not kinked or twisted.
Kinked hoses reduce washing performance.
3. Pull down on the locking collar while lifting the hose
connector onto the faucet adapter.
,k
2.
3.
I. Faucet adapter
2. Locking collar
3. Hose connector
4. When the connector snaps into place, release the
locking collar.
5. Turn the hot water on slowly until it is all the way on.
6. Plug into a grounded 3 prong outlet.
9