Ultra Wash Soil Removal System; Start-Up Guide; Using Your New Dishwasher; Connecting The Dishwasher (On Portable Models Only) - Kenmore ULTRA WASH Use & Care Manual

Hide thumbs Also See for ULTRA WASH:
Table of Contents

Advertisement

Available languages

Available languages

®
ULTRA WASH
The ULTRA WASH soil removal system gives you sparkling clean
dishes, while using less energy and time. The ULTRA WASH soil
removal system includes:
A multilevel wash sytem with a self-cleaning filter.

START-UP GUIDE

Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.

Using Your New Dishwasher

1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
3. Properly load the dishwasher. (See "Dishwasher Loading.")
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing keeps the spray arm(s)
from spinning freely.
4. Add detergent. Always use a high-quality brand detergent.
(See "Dishwasher Use.")
5. Push door firmly closed. The door latches automatically.
6. Run hot water at the sink nearest your dishwasher until the
water is hot. (See "Dishwasher Efficiency Tips.") Turn off
water.
7.
Press the desired cycle and option selections. (See
"Dishwasher Use.")
8. Press START/RESUME, or press START/RESUME to repeat
the same cycle and options as the previous cycle.
Soil Removal System
IMPORTANT: The Start/Resume light will flash if the door is
opened during a cycle. Power interruptions during a cycle
may also cause the Start/Resume light to flash. Press START/
RESUME to continue a cycle.
CONNECTING THE
DISHWASHER
(On portable models only)

Connecting the Faucet Adapter

NOTE: A special adapter must be installed on the faucet before
the dishwasher can be connected. Complete Installation
Instructions and the adapter are packed with your dishwasher.
(See the Installation Instructions.)
When moving your dishwasher, make sure the door is latched.
Hold the dishwasher at the top front corners.
Preparing the faucet
1. Remove the screen holder or aerator, screen, and washer
from the end of the faucet.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher will be
used.
NOTE: Remove and save the washer, screen, and screen holder
or aerator for future use.
A
B
C
A. Washer
B. Screen
C. Screen holder or aerator
Connecting the faucet adapter to faucets with
external threads
Insert the 2 screens and then the thin washer from the faucet
adapter kit into the faucet adapter. Attach the adapter onto the
end of the faucet.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents