Loading The Bottom Rack - Kenmore 665.17799 Use & Care Manual

The top rack is designed for cups, glasses, and smaller
items. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
Utensil basket
Use this extra capacity basket on the top rack to held
spatulas, wooden spoons, and similar items.
No-flip clips (on some models)
The no-flip clips hold lightweight plastic items like cups,
lids. or bowls in place during washing. You can move a clip
anywhere in the rack.
10 place setting
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
The bottom rack is designed for plates, pans, casseroles,
and utensils. Items with cooked-on or dried-on food
should be loaded with soiled surfaces facing inward to the
spray. (See recommended leading patterns shown.)
NOTE: -the features on your dishwasher rack may vary
from the drawings shown
12 place setting
Place items so open ends face down for cleaning and
draining.
Load glasses in top rack only. The bottom rack is not
designed for glasses. Damage can occur.
Place cups and glasses in the rows between prongs.
Placing them over the prongs can lead to breakage.
China, crystal, and other delicate items must not touch
each other during dishwasher operation. Damage may
occur.
Load plastic items in the top rack only. Only plastic
items marked "dishwasher safe" are recommended.
Load plastic items so the force of the spray does not
move them during the cycle.
To avoid chipping, do not let stemware touch other
items.
Small bowls, pans, and other utensils can be placed in
the top rack. Load bowls in the center section for best
stability.
10 place setting
Do not load glasses, cups, or plastic items in the
bottom rack. Load small items in the bottom rack only
if they are secured in place.
Load plates, soup bowls, etc., between prongs and
facing inward to the spray.
Overlap the edges of plates for large loads.
11