Changing Time Display - American Audio CK-1000 MP3 User Manual

BASIC OPERATIONS (CONT.)
10. CHANGING THE TImE DISPLAY (57)/TImE BAR (51):
DURING NORMAL PLAYBACK, pressing the tImE Button (4), will change the
time display information in the lcd (21). The following is a break down of the
time settings and their definitions:
1) REMAIN (58) - This details the time in the lcd (21) as the current tracks'
remaining running time.
2) ELAPSED (58) - This details the time in the lcd (21) as the current tracks'
elapsed running time.
3) TOTAL REMAIN (58) - This details the time in the lcd (21) as the current CD
total remaining running time.
TIME BAR INDICATOR - Details the time defined in the tImE mEtEr (57) as a visual bar icon. As with the
tImE mEtEr (57) this bar is also dependent on the selected time function [rEmaIn, total rEmaIn, or
ElapSEd (58)]. This bar will begin to flash when a track is ending regardless of which time function you are in.
Use the flashing bar as a visual reminder that a track is ending.
©
REPLAY LOOP
stored loop at any time. The In Button (14) and out Button (13) LEDs will
indicate a loop is stored in memory, and may be played at any time. To replay
the loop, press the rEloop Button (10). The In Button (14) and out But-
ton (13) LEDs will again begin to flash indicating SEAMLESS LOOP mode has
been activated and your stored loop will immediately begin to play.
Figure 19
American Audio - www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 21
®
- The rEloop (10) function allows you to return to your
Figure 20