ISOLATED OUTPUT WIRING DIAGRAMS
Ground terminations, inside the UPS rear cover, are located directly
below the line input terminals. Figure 15 on page 28 shows input and
output wiring terminals inside the Eaton 9170+ UPS cabinet.
If there is any question as to the need for this bond wire, contact your
local regulatory agency or your service representative.
N-G Bond Wire
X1
X3
X0
X2
Figure 37. N-G Bond Wire
S
164201393 Rev E www.eaton.com/powerquality
55
+
Eaton 9170
UPS (3–18 kVA) User's Guide