Eaton Powerware 9170+ UPS 3–18 kVA User Manual page 104

SPECIFICATIONS
Table 16. Model Specifications for Split-Phase Power Modules (ASY-0673)
Optional UPS
Chargers kVA/Watts
NA 3/2500
CAUTION Do NOT install more than three power and/or battery charger modules in a 6-slot cabinet.
Optional UPS
Chargers kVA/Watts
0 3/2500
1 3/2500
2 3/2500
0 6/5000
1 6/5000
0 9/7500
CAUTION Do NOT install more than seven power and/or battery charger modules in a 9- or 12-slot cabinet.
Optional UPS
Chargers kVA/Watts
0 3/2500
1 3/2500
2 3/2500
* In High-Efficiency and Bypass modes the input current equals the output current plus 2A for each power module in
the system. For redundant power module operation (N+X), increase the input current rating by 2A for each additional
redundant power module.
** Maximum current rating for the cabinet size. If an additional charger is desired, it must be installed in external
battery cabinet XXXXX-Model/Batt4.
98
+
Eaton 9170 UPS (3–18 kVA) User's Guide
Three-Slot Cabinet
Input Current
(200V)* (100/200V, 110/220V, 120/240V)
16A**
Six-Slot Cabinet
Input Current
(200V) (100/200V, 110/220V, 120/240V)
16A
32A
48A**
32A
48A**
48A**
Nine- and Twelve-Slot Cabinet
Input Current
(200V) (100/200V, 110/220V, 120/240V)
16A
32A
48A
S 164201393 Rev E www.eaton.com/powerquality
Output Current
15A, 14A, 12.5A
Output Current
15A, 14A, 12.5A
15A, 14A, 12.5A
15A, 14A, 12.5A
30A, 28A, 25A
30A, 28A, 25A
45A, 42A, 37.5A
Output Current
15A, 14A, 12.5A
15A, 14A, 12.5A
15A, 14A, 12.5A
Recommended Heat
Input Service* Dissipation
25A 285W
(0.98 kBTU/hr)
Recommended Heat
Input Service Dissipation
25A 285W
(0.98 kBTU/hr)
40A 570W
(1.95 kBTU/hr)
60A 860W
(2.93 kBTU/hr)
40A 570W
(1.95 kBTU/hr)
60A 860W
(2.93 kBTU/hr)
60A 860W
(2.93 kBTU/hr)
Recommended Heat
Input Service Dissipation
25A 285W
(0.98 kBTU/hr)
40A 570W
(1.95 kBTU/hr)
60A 860W
(2.93 kBTU/hr)