Interface/Display; Electrical Connections - Emerson Micro Motion Transmitters and Discrete Controllers Series 3000 Product Data Sheet

Interface/display

Display
Models 3300 and 3500
Models 3350 and 3700
Keypad membrane switch

Electrical connections

Input and output connections
Rack-mount
Panel-mount
Field-mount
Power connection
Rack-mount
Panel-mount
Field-mount
Backlit LCD, 128 × 128 pixel, bit map
Adjustable contrast
Non-glare, chemical-resistant acrylic lens
Backlit LCD, 128 × 128 pixel, bit map
Adjustable contrast
Non-glare tempered glass lens
Suitable for hazardous area installation
Large push buttons with tactile feedback
Software-defined function keys
Chemical-resistant polyester
Type D connectors per DIN standard 41612 (IEC 603-2)
Available as solder tails (standard) or screw terminals (optional)
Screw terminals accept 24 AWG (0.25 mm
Screw terminals (standard) or I/O cable with remote DIN rail-mount screw
terminals (optional)
Remote terminals attach to any of four rail types. I/O cable is available in lengths of 2, 5, and 10
feet (0.6, 1.5, and 3 meters)
Screw terminals accept 24 AWG (0.25 mm
Two color-coded wiring compartments:
• Compartment with intrinsically safe terminals has two 3/4-inch NPT or M20 × 1.5 conduit
openings
• Compartment with non-intrinsically safe terminals has three 3/4-inch NPT or M20 × 1.5
conduit openings
Screw terminals accept 22 AWG (0.34 mm
Screw terminals are fixed to rack chassis
Ground makes first and breaks last
Screw terminals accept 18 AWG (0.75 mm
Screw terminals accept 18 AWG (0.75 mm
Screw terminals accept 18 AWG (0.75 mm
Micro Motion
2
) to 16 AWG (1.5 mm
2
) to 16 AWG (1.5 mm
2
) to 16 AWG (1.5 mm
2
) to 14 AWG (2.5 mm
2
) to 14 AWG (2.5 mm
2
) to 12 AWG (4.0 mm
®
Series 3000 Transmitters and Discrete Controllers
2
) wires
2
) wires
2
) wires
2
) wires
2
) wires
2
) wires
5