Installing A Floppy Drive - Dell XPS 710 Service Manual

1 power cable
5. Slide the drive release latch towards the base of the computer to release the shoulder screw, and then slide the drive out of the drive bay.
1 drive release latch
6. Replace the drive panel (see
7. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
8. Connect the computer and devices to electrical outlets, and turn them on.

Installing a Floppy Drive

1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the drive panel (see
4. Remove the existing floppy drive, if applicable (see
2 floppy drive data cable
2 floppy drive
Replacing the Drive Panel).
Replacing the Computer Cover).
Begin.
Removing the Computer Cover).
Removing the Drive Panel).
Removing a Floppy Drive).