Cd/Dvd Drive - Dell XPS 710 Service Manual

3. Remove the drive panel (see
4. Remove the existing media card reader, if applicable (see
5. If no screws are attached to the Media Car d Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws
to the new card reader.
1 media card reader
6. Slide the Media Card Reader into the drive bay until it clicks into place.
1 drive release latch
7. Attach the power and data cables to the back of the Media Card Reader.
8. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
9. Replace the drive panel (see
10. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
11. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
12. Enter system setup (see Entering System Setup) and select the appropriate USB for FlexBay option.
CD/DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Removing the Drive Panel).
Removing a Media Card
2 shoulder screws (4)
2 media card reader
Replacing the Drive Panel).
Replacing the Computer Cover).
Reader).