Removing A Media Card Reader - Dell XPS 710 Service Manual

5. If no screws are attached to the new floppy drive, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws to
the new drive.
1 floppy drive
Slide the floppy drive into the drive bay until it clicks into place.
1 drive release latch
6. Connect the power and data cables to the back of the floppy drive.
7. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
8. Replace the drive panel (see
9. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
10. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11. Enter system setup (see Entering System Setup), and select the appropriate Diskette Drive option.
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

Removing a Media Card Reader

1. Follow the procedures in Before You
2 shoulder screws (4)
2 floppy drive
Replacing the Drive Panel).
Replacing the Computer Cover).
Begin.