Relay Key Station; Relay Broadcast Report; Initiating Relay Broadcast - Oki OKIFAX 4550 User Manual

GB4550.book Page 60 Wednesday, June 14, 2000 9:21 PM
English
Relay Password: This is the relay key word (up to 20 digits) which is
programmed into the relay key station.
Relay Group Numbers: These numbers (up to 20 digits) are the code
numbers of locations or groups of locations programmed into the relay
key station.

Relay key station

The relay key station is the fax machine which receives the original fax
message and then automatically relays or broadcasts the message to other
fax machines. For this feature to be available, the relay key station must
be a fax machine that has a sub-function for relay request.

Relay broadcast report

After a relay broadcast is completed, it is possible for the relay key station
to send a message back to your fax machine confirming the success of the
relay broadcast. For this function to work, the telephone number of your
fax machine must be programmed into the Auto Dial list of your fax
machine with the Auto Dial code number 70.

Initiating relay broadcast

1. Load your document.
2. Press the Select Function key.
3. Press the 4/Relay Initiate TX One Touch key. The display shows
RELAY PASSWORD.
4. Using the numeric keypad, enter a password of up to 20 digits,
which is the same as the relay password programmed into the relay
key station.
Note: If you are initiating a relay broadcast to another relay key
station, press the NO " key. Using the numeric keypad, enter the
4-digit password of the other relay key station.
5. Press the Start key. The display shows REMOTE LIST NO.
6. Using the numeric keypad, enter a number of up to 20 digits which
corresponds to a relay group programmed into the relay key station.
Note: If you are initiating a relay broadcast to another relay group,
press the NO " key. Using the numeric keypad, enter the 2-digit
number of the other relay group.
60