Table of Contents
Advertisement
GB4550.book Page 38 Wednesday, June 14, 2000 9:21 PM
English
Message
DIALLING
CALLING
SENDING
RESULT = OK
COMMUN. ERROR
Note:
When the ISDN G4 option is installed, if a fax number is entered
with the numeric keypad, the fax machine shows the current
transmission mode G3 or G4. To select the current setting, press
the ! YES key. To change the current setting, press the NO "
key first and confirm this new setting with the ! YES key.
Search key dialling
If you are not sure which One Touch key or Auto Dial number contains
the location you want to communicate with, use the Search key to look
through an alphabetical list of all of the Location IDs programmed into
your fax machine.
1.
When selecting locations, press the Search key. The display will
show ENTER 1'ST CHAR.
2.
Repeatedly press the Search key to look through the entire list of
locations in alphabetical order, or locate the letter you want on the
numeric keypad, and press that key repeatedly to look through
Location IDs beginning with that letter.
3.
Press the Start key as soon as the desired location appears on the
display.
Real-time dialling
Normally, your fax machine dials the entire number of the location you
have selected at one time. Occasionally, it may be necessary to dial
numbers in real time (one digit at a time). If your fax machine is equipped
with a handset, you can dial in real time by picking up the handset or press
the Hook/V. Request key.
Note:
Real-time dialling with use of the Hook/V. Request key is not
available in some countries. Also, when the ISDN option is fitted,
real-time dialling is not available.
38
Explanation
Your fax machine is dialling the number.
The line is ringing.
Your fax machine is sending the message.
The fax was sent successfully.
If you see this or another error message, a problem occurred during
the communication. Try resending the fax. Refer to Problem Solving
for assistance.
Advertisement
Table of Contents
