9. Reinstall the audio EMI shield.
10. Reinstall the two IDE connector screws at both ends of the IDE (media
11. Reinstall the four 5-mm socket screws for the VGA and parallel ports
12. Replace the audio I/O cover.
13. Replace the two M2 x 4-mm screws to secure the audio I/O cover to the
14. Reinstall the palmrest assembly.
15. Reinstall the keyboard assembly.
16. Reinstall the display assembly.
17 . Reinstall the keyboard bezel.
Main Battery Release Latch
Figure 24. Main Battery Release Latch Removal
support.dell.com
a. Carefully position the audio EMI shield so the section with the
two-sided tape is over the USB connector housing.
b. Press the audio EMI shield down so it attaches to the USB connector
housing.
c. Reattach the EMI adhesive sponge across the thermal cooling solution.
bay) connector located on the back of the bottom case assembly.
located on the back of the bottom case assembly
bottom case assembly.
tension spring
Dell Latitude LS Portable Computers Service Manual
bottom case assembly
main battery release latch
release button
33