Palmrest Assembly; Figure 14. Removing The Palmrest Assembly Bottom Screws - Dell Latitude LS Service Manual

20 Dell Latitude LS Portable Computers Service Manual
If you do not hear a click as each end of the memory module snaps into the
tabs, remove the memory module and reinstall it.

Palmrest Assembly

Figure 14. Removing the Palmrest Assembly Bottom Screws

The palmrest assembly consists of the palmrest, status lights, and touch pad
assembly.
NOTICE: To avoid damaging the system board, you must remove the
main battery before you service the computer.
1. Remove the keyboard bezel.
2. Remove the display assembly.
3. Remove the keyboard assembly.
4. Turn the computer upside down on a flat work surface.
5. Remove the six M2.6 x 1.6-mm screws located in the battery bay
(see Figure 14).
NOTICE: Make sure that the work surface is clean to prevent
scratching the computer cover.
6. Turn the computer right-side up.
7 . Remove the four black M2 x 4-mm screws across the top of the computer
(see Figure 15).
M2.6 x 1.6-mm screws (6)