Display Assembly Bezel; Figure 9. Display Assembly Bezel Removal - Dell Latitude LS Service Manual

12 Dell Latitude LS Portable Computers Service Manual

Display Assembly Bezel

l
large rubber screw covers (6)
M2 x 3.5-mm screws (6)
LCD panel
back light
plug
left hinge
M2 x 3.5-mm screw
inverter
display-assembly top cover

Figure 9. Display Assembly Bezel Removal

NOTICE: To avoid damaging the system board, you must remove the
main battery before you service the computer.
1. Use a scribe to carefully pry the six rubber screw covers out of the six
screw holes located along the top and bottom of the bezel on the front of
the display assembly (see Figure 9).
2. Remove the six M2 x 3.5-mm screws located at the top and bottom of the
bezel on the front of the display assembly (see Figure 9).
display assembly bezel
M2.6 x 4-mm screws (4)
right hinge
latch