Display Assembly; Figure 8. Display Assembly Removal - Dell Latitude LS Service Manual

Display Assembly

left hinge cover
LCD flex-cable
hold-down clip
LCD flex cable

Figure 8. Display Assembly Removal

NOTICE: To avoid damaging the system board, you must remove the
battery before you service the computer.
1. Remove the keyboard bezel.
2. Close the display.
3. Remove the two M2 x 4-mm screws at the back of the computer that
4. Turn the computer upside down on a flat work surface.
support.dell.com
M2 x 8.5-mm screw
secure the display assembly to the bottom case (see Figure 8).
Dell Latitude LS Portable Computers Service Manual
display assembly
right hinge
cover
M2 x 4-mm screws (4)
9