Dell Latitude LS Service Manual page 20

6. Reinstall the two M2 x 4-mm screws that secure the display assembly to
7 .
8. Tighten the two screws that you installed in step 6.
9. Open the display and reinstall the left and right hinge covers.
support.dell.com
the bottom case.
You may have to squeeze the display assembly and the bottom assembly
together, so the screw holes align in the base assembly and the hinge
posts.
Do not completely tighten the screws.
Reinstall the two M2 x 4-mm screws in the back of the computer that
secure the display assembly to the back of the bottom case.
An L is stamped on the bottom of the left hinge cover and an R is stamped
on the bottom of the right hinge cover.
Dell Latitude LS Portable Computers Service Manual 11