If A Paper Mismatch Occurs; Continuing Printing Using Mismatched Paper - Ricoh SP 311SFNw User Manual

If a Paper Mismatch Occurs

The machine reports an error if:
• The paper type does not match the print job's settings when [Input Tray;] is set to [Auto Tray Select].
• The paper size does not match the print job's settings when [Size Mismatch Detection] in [Tray
Paper Settings] under system settings is enabled.
There are two ways to resolve these errors:
Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched paper.
Reset the print job
Cancel printing.
• For details about [Size Mismatch Detection], see page 147 "System Settings".
• If [Auto Continue] under system settings is enabled, the machine ignores the paper type and size
settings and prints on whatever paper is loaded. Printing stops temporarily when the error is
detected, and restarts automatically after about ten seconds using the settings made on the control
panel.
• For details about [Auto Continue], see page 147 "System Settings".

Continuing Printing Using Mismatched Paper

If the paper is too small for the print job, the printed image will be cropped.
1. If the error message is displayed, press [FormFeed].
CVW106
If a Paper Mismatch Occurs
57