Ricoh SP 311SFNw User Manual page 232

10. Troubleshooting
Error Code
1XXX32 to 1XXX84
2XXX14
2XXX32 to 2XXX84
230
An error occurred while sending a fax.
• Confirm that the telephone line is properly connected to
the machine.
• Disconnect the telephone line from the machine, and
connect a standard telephone in its place. Confirm that
you can make calls using the telephone. If you cannot
make calls this way, contact your telephone company.
• If the problem persists, contact your sales or service
representative.
The machine was not able to print the received fax, or the
machine's memory reached capacity while receiving a fax
because the document was too large.
• The paper tray was empty. Load paper in the paper tray.
See page 41 "Loading Paper".
• The paper tray did not contain A4, Letter, or Legal size
paper. Load valid size paper in the tray, and configure
the paper size settings under [System Settings]
accordingly.
• A cover or tray was open. Close the cover or tray.
• There was a paper jam. Remove the jammed paper. See
page 211 "Paper Feed Problems".
• A print cartridge was empty. Replace the print cartridge.
See page 201 "Replacing the Print Cartridge".
• The received fax was too large. Ask the sender to re-send
the document in parts as several smaller individual faxes,
or to send at a lower resolution.
An error occurred while receiving a fax.
• Confirm that the telephone line is properly connected to
the machine.
• Disconnect the telephone line from the machine, and
connect a standard telephone in its place. Confirm that
you can make calls using the telephone. If you cannot
make calls this way, contact your telephone company.
• If the problem persists, contact your sales or service
representative.
Solution