5.10 Engine Shield Ass'y & Exit Board
1. Before you remove the Engine Shield Ass'y, you
should remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
- Scanner (see page 5-5)
2. Unplug 4 connector.
AC Connector
Main Connector
3. Remove the 12 screws securing the Engine Shield
AC Connector
4. Remove the 2 screws to remove the exit board.
Fan Connector
Ass'y and remove it. Then unplug the all the connec-
tors from the Main PBA and SMPS.
Engine shild Ass'y
Precautions
Exit Board
Service Manual
5-13