5.5 Scanner Ass'y
1. Before you remove the Scanner Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover (LH, RH) (see page 5-3)
2. Remove the 2 screws securing the Scanner Ass'y, as
shown below.
3. Remove the 5 connectors and the ground wire screw
from the main PBA as shown below.
4. Pull up the Scanner Ass'y, as shown below.
5. Pull the Platen Cover upward and remove it.
3
Precautions
1
2
Service Manual
5-5