GE ZET3038 Owner's Manual page 41

Before You Call For Service...
Trivection ''_ Wall Oven
Trouble-
shooting
tips
PROBLEM POSSIBLE CAUSE
* Oven controls improperly set. See the U_ing" 7?_aditional Bake and
Roast section.
FOOD DOES NOT
BAKE OR ROAST
PROPERLY IN
THE OVEN
FOOD DOES NOT
BROIL PROPERLY
CLOCK AND TIMER
DO NOT WORK OR
DISPLAY GOES BLANK
OVEN TEMPERATURE
TOO HOT OR TOO
COLD
OVEN WILL
NOT WORK
* Rack position is incorrect or the rack is not level. See the Using"
Traditional Bake and Roast section.
* Incorrect cookware or cookware of improper size being used.
See the Using" 7}_aditional Bake and Roast section.
* Oven temperature needs adjustment. See the Adjust the Oven
%mperature--Do it _mrsdfi section.
* Oven controls improperly set. Make sure you select BROIL.
* hnproper rock position being used. See the Broiling Guide.
* Cookware not suited for broiling. Use the broiling pan and grid that
came with your oven.
* Aluminum foil used on the broiling pan and grid has not been
fitted properly and slit as recommended. See the Using"7}aditional
Bake and Roast secdon.
* In some areas the power (voltage) may be low. Preheat the broil
element for 10 minutes. Broil for the longest period of time
recommended in the Broiling" Guide.
The clock is in the no clock mode. See the Settir_gs section for the
oven clock.
Controls improperly set. See the Using"the (-;lockand Lower Oven
7Vmersection.
A fl_se in your home may be blown or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Oven temperature needs adjustment. See the Adjust the Oven
%mperature--Do it _mrse!fi section.
* Oven controls improperly set. See the Using" the Oven section.
* A fi_se in your home may be blown or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
OVEN WILL *
NOT SELF-CLEAN
@
"CRACKLING" OR *
"POPPING" SOUND
IN THE OVEN
EXCESSIVE SMOKING *
IN THE OVEN DURING
A CLEAN CYCLE
OVEN DOOR WILL *
NOT OPEN AFTER
A CLEAN CYCLE
OVEN NOT CLEAN
AFTER A CLEAN
CYCLE
The oven temperature is too high to set a self'clean operation. Allow
the oven to cool and reset the controls.
Oven controls improperly set. See the Usir_g"the Sd/:Cleaning"
Oven section.
This is the sound of the metal heating and cooling during both the
cooking and cleaning flmctions. This is nortnal.
Excessive soil. Press the CLEAR/OFF pad. Open the windows to rid
the room of smoke. Wait until the _ (LOCK) light goes off. Wipe up
the excess soil and reset the clean cycle.
Oven too hot. Allow the oven to cool below locking temperature.
* Oven conuols improperly set. See file (/sir_g"tk,e Se_(;k_anir_g ()ver_ section.
* Oven was heavily soiled. Clean up heax T spillovers before starting the
clean cycle. Heavily soiled ovens may need to self'clean again or for a
longer period of time.
41