Manual Backup - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Before Using The System

Manual backup

The navigation system will automatically back
up (save) your new settings (for example,
memory point settings etc.) when the ignition
switch is turned off and turned on again. If the
battery leads should be disconnected from the
vehicle's battery, be sure to manually back up
your new settings before disconnecting the
battery leads as described below.
Press the MENU button to display
1
the main menu. Select "Set-up"
from the main menu, then select
"BACKUP MEMORY" from the sub-
menu and press ENTER.
The "Backup now?" menu
2
appears. If your answer is yes,
select "Yes" and press ENTER.
14
The navigation system starts the
3
backup process and the display
becomes darker for a little while.
The display shows the opening
screen, then "Please be sure to
read this!" screen.
After you have read this important
4
information, press the ENTER
button.
The map screen is displayed.