Power Off - Sony XDS-1000 Operation Manual

Professional media station
Hide thumbs Also See for XDS-1000:
Table of Contents

Advertisement

can occur. When installing and using the unit, closely
observe the following precautions.
Protect from shocks and vibrations
When subject to shocks or vibrations, the HDD can be
damaged and corruption of data on the HDD can occur.
• When transporting the unit, use the specified packing
material. When transporting on a dolly or similar, use a
type which does not transmit excessive vibrations.
Excessive shocks and vibrations can damage the HDD.
• Never move the unit while it is powered.
• Protect all HDD-equipped devices in the rack from
shocks.
• Before removing or inserting the unit in a rack, make
sure that power to any other HDD-equipped devices in
the rack is also switched OFF.
• Place the unit on a level and stable location.
• Do not place the unit near other devices that may become
a source of vibrations.
Do not expose to static electricity
Remove any plastic items that can produce static
electricity (bubble wrap, etc.) from the work area. Also,
when handling the HDD, make sure to wear a grounded
antistatic strap.
Wait for 30 seconds after turning the

power off

For a brief interval after the power is turned off, the platters
inside the HDD will still keep spinning and the heads will
be in an insecure position. During this interval, the unit is
more susceptible to shocks and vibrations than during
normal operation. For a period of at least 30 seconds after
turning the power off, avoid subjecting the unit even to
very light shocks. After this period, the hard disk will be
fully stopped and the unit can be manipulated.
Temperature and humidity related
precautions
Use and store the unit only in locations where the specified
temperature and humidity ranges are not exceeded. Also,
do not power the unit on while its outer case is removed.
Temperature range for operation: +5 to +40ºC (+41 to
+104ºF)
Humidity range for operation: 20 to 90% relative
humidity (no condensation)
Temperature range for storage: –20 to +60ºC (–4 to
+140ºF)
When HDD seems to be faulty
Even if the HDD is showing signs of malfunction, be sure
to observe all the above precautions. This will prevent
further damage from occurring until the problem can be
diagnosed and corrected.
HDD replacement
Contact your Sony service or sales representative about
periodic replacement of the HDD.
95
Important Notes on Operation

Advertisement

Table of Contents
loading

Table of Contents