Sony XDS-1000 Operation Manual page 21

A Input signal display
E Reference level
D Audio channel
C Monitor channel
A Input signal display: Displays the audio input signal.
.
Display Input signal
ANA-1 Analog audio
signal
ANA-2
AES/EBU AES/EBU format digital audio signal
(flashes when there is no input signal)
HD-SDI HD-SDI audio signal (flashes when
there is no input signal)
SD-SDI SD-SDI audio signal (flashes when
there is no input signal)
SG Test signal from the internal signal
generator
DVB-ASI DVB-ASI TS signal (flashes when there
is no input signal)
When the video input signal is set to
"DVB-ASI", A1 INPUT to A8 INPUT are
automatically set to "DVB-ASI".
B Data indication: Appears when the input signals are
non-audio signals.
C Monitor channel: Displays the audio monitoring
channels set with MONITR L and MONITR R on the
HOME page of the function menu (see page 41).
D Audio channel: Displays the audio channels.
Also indicates preset or variable-speed mode by its
color (see page 17).
White: Preset mode
Green: Variable-speed mode
E Reference level: Displays the reference level for
recording as set in the maintenance menu.
F Level bars: Display the audio recording or playback
levels of channels 1 to 8. The OVER indicators light
when the audio level exceeds 0 dB.
B Data indication
F Level bars
Channel 1, 3, 5, 7
Channel 2, 4, 6, 8
c System information
A Reference signal
B Video input display
A Reference signal: This displays the type of reference
signal to which this unit is synchronizing.
When there is no display, the unit is synchronizing to
the internal reference signal.
INPUT: Input video
HD REF: HD-format reference signal
SD REF: SD-format reference signal
B Video input display: This displays the currently
selected video input signal.
HD-SDI: HD-SDI video input
SD-SDI: SD-SDI video input
SG: Test video signal from the internal signal
generator
1)
DVB-ASI : DVB-ASI TS signal
1) When the maintenance menu item M22: OPTION SETTING >DVB-
ASI is set to "ON" with the optional PDBK-202 being installed (see
page 88).
The video signal input is selected with V INPUT on
page P1 INPUT of the function menu (see page 42).
Note
The display blinks when there is no video input signal,
and when the video input signal does not match the
system frequency of this unit.
d Media status display
Displays the icons in the following table to indicate the
status of the selected recording media.
Icons
HDD Memory card
(slot A selected)
–
e Recording or playback format
When the recording port is selected, displays the recording
format. When the playback port is selected, displays the
format of the clip being played.
Status
Not loaded
Being mounted
Normal status
Warning level error has
occurred
Error has occurred
(restoring is impossible)
21
Front Panel