Sony XDS-1000 Operation Manual page 35

Device
RM-280 (editing controller)
This unit (player)
Using the editing functions of the recorder (controlling through REMOTE (9P) connector)
The following figure shows a cut editing system
comprising this unit as a player, and an HDW-M2000/
M2000P unit as a recorder. In this example, video and
HD video monitor
HDW-M2000/
M2000P (recorder)
HD video monitor
Settings on each unit
Device
HDW-M2000/M2000P (recorder)
This unit (player)
For details of HDW-M2000/M2000P settings, refer to the
Settings
• EDITOR/REMOTE CONTROL selector switch: EDITOR
• Setup menu 01 PREROLL: 5s
• Setup menu 05 SYNC SEL: ON
• Setup menu 06 SYNC VTR: RECORDER
• Setup menu 09 EDIT DLY: AUTO
• Setup menu 10 R ST DLY: AUTO
• Setup menu 11 P ST DLY: AUTO
• Setup menu 19 FNC MODE: NORMAL
• Setup menu item 208 PROTOCOL FOR REMOTE(9P): VTR
• REMOTE button (for playback port): Lit
To HD-SDI input connector
To HD-SDI input
connector
Settings
REMOTE 1 (9P) button: Unlit
• Setup menu item 208 PROTOCOL FOR REMOTE(9P): VTR
• REMOTE button (for playback port): Lit
audio signals are connected by HD-SDI, and control
signals are transferred via a REMOTE (9P) connector.
This unit (player)
1: 75 Ω coaxial cable (not supplied)
2: 9-pin remote control cable (not supplied)
HDW-M2000/M2000P Operation Manual.
Reference video signal
Connections and Settings
35