Sony XDS-1000 Operation Manual page 67

Notes
• For *.MXF files or *E01.SMI files, the UMID of the
copy source file is not saved. However, it is saved if an
immediately preceding SITE UMMD extended
command has been issued. For *E01.SMI files,
execution of the STOR command results in an error if
material with the same UMID already exists at the
transfer destination directory.
• For *.MXF files, some data, such as file header
metadata, may be missing.
• Depending on the transfer destination directory and the
file type, transfer may not be possible.
For details, see "File operation restrictions" (page 62).
Command syntax: STOR <SP> <path-name> <CRLF>
Input example: STOR Edit/E00001E01.SMI
RNFR
RNTO
Rename a file.
Specify the file to be renamed with the RNFR command,
and specify the new name with the RNTO command.
(Always follow a RNFR command with a RNTO
command.)
For details, see "File operation restrictions" (page 62).
Command syntax: RNFR <SP> <path-name (before
change)> <CRLF>
RNTO <SP> <path-name (after change)> <CRLF>
Input example: RNFR Clip/CLIP00001.MXF
RNTO Clip/News_digest.MXF
DELE
Deletes the specified file on this unit.
Note
Depending on the directory and file type, deletion may not
be possible.
For details, see "File operation restrictions" (page 62).
Command syntax: DELE <SP> <path-name> <CRLF>
Input example: DELE Clip/CLIP00099.MXF
STAT
Sends information about properties of the specified file, or
about data transfer status, from this unit to the remote
computer.
The following property information is sent, depending on
the file type.
• MXF file
- File name
- File type
- CODEC type
- Frame rate
- Number of audio channels
- Duration
- UMID
• non-MXF file
- File name
Command syntax: STAT <SP> <path-name> <CRLF>
The following data is transferred, depending on whether a
file is specified with <path-name>.
• File specified: The properties of the specified file
1)
• No specification:
Input example: STAT Clip/CLIP00001.MXF
1) Not supported in this version; always size 0.
ABOR
Requests this unit to abort a file transfer currently in
progress.
Command syntax: ABOR <CRLF>
SYST
Displays the system name of this unit.
Command syntax: SYST <CRLF>
HELP
Displays a list of the commands supported by this unit, or
an explanation of the specified command.
Command syntax: HELP <SP> <command-name>
<CRLF>
The following data is transferred, depending on whether a
command name is specified with <command-name>.
• Command name specified: Explanation of the specified
command.
• No specification: Command list
Input example: HELP RETR
NOOP
Does nothing except return a response. (Used to check
whether this unit is running.)
Command syntax: NOOP <CRLF>
PWD
Displays the current directory ("/" if the directory is the
root directory).
Command syntax: PWD <CRLF>
CWD
Changes the current directory (moves from the current
directory to another directory).
Command syntax: CWD <SP> <path-name> <CRLF>
67
FTP File Operations