Sony XDS-1000 Operation Manual page 98

When a memory card is inserted
Alarm message in status
display area
Unknown Media(A/B)
Media Error(A/B)
Unknown FS!(A/B)
R/W Limit(A/B)
Over DUR!(A/B)
During front panel operations
Alarm message in status
display area
KEY INHI.!
Not Open Clip!
Clip Top!
Clip End!
MAX # Clips
Media Full!
TC EXT!
REGEN mode!
REC mode!
STOP ONCE!
98
Troubleshooting
Alarm message in video monitor screen Description/action
UNKNOWN MEDIA(A/B).
PLEASE CHANGE.
MEDIA ERROR.
MEDIA(A/B) NEEDS TO BE RESTORED.
CANNOT USE MEDIA(A/B).
UNSUPPORTED FILE SYSTEM.
MEDIA REACHED REWRITE LIMIT.
CHANGE MEDIA(A/B).
EXCESSIVE DURATION IS IN
MEDIA(A/B) .
Description/action
This appears when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
This appears when a clip operation is attempted with no clip selected.
Select a clip in the clip list screen and try the operation again.
During playback, this appears if you execute a reverse search when the unit is stopped at the first
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During playback, this appears if you execute a forward search when the unit is stopped at the last
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
No more clips can be recorded because the maximum number of recorded clips has been
reached.
Delete unneeded clips.
Recording or copying is not possible because the internal storage is full.
Delete unneeded clips.
This appears when TCG on page P4 TC of the function menu is set to "EXT", and you try to preset
timecode or user bits by setting PRST/RGN to "PRESET".
Set TCG to "INT" (see page 43).
This appears when PRST/RGN on page P4 TC of the function menu is set to "TC" or "VITC", and
you try to preset timecode or user bits.
Set PRST/RGN to "PRESET" (see page 43).
Stop recording and try again.
This appears when an attempt is made to change media during recording or playback.
Stop the recording or playback and try the operation again.
The inserted memory card has been partitioned, or it
contains more clips that the maximum that can be
handled by this unit.
Insert a memory card that has not been partitioned, or
one that contains fewer than the maximum number of
clips.
A memory card must be restored because an error
has occurred in the card.
Remove the card, and then use an XDCAM EX
device to restore or format it.
The inserted memory card is formatted with an
unsupported file system, or it is not formatted.
Exchange the memory card for one that is formatted
with a file system supported by this unit.
The memory card has reached its lifetime rewriting
limit.
As required, copy the clips on the memory card to
internal storage, and then exchange the memory
card.
Note
If you continue to use the memory card, normal
recording and playback may not be possible.
A clip with a duration that exceeds 12 hours is
recorded on a memory card.
This memory card cannot be used.