Display Screen - Sony XDS-1000 Operation Manual

d Jog/shuttle direction indicators
These show the playback direction in jog, shuttle, or
variable-speed mode.
b (green): Lights during playback in the reverse direction.
B (green): Lights during playback in the forward
direction.
x (red): Lights during still image display.
e Shuttle/jog dial
The dial switches between shuttle/variable-speed mode
and jog mode each time that you press it all the way in.
Shuttle/variable-speed mode: The dial is in the raised
position.
Jog mode: The dial is in the depressed position (the JOG
indicator is lit).
Turn the dial to the right to play in the forward direction,
and turn it to the left to play in the reverse direction.
• In jog mode, the playback speed varies from –1 to +1
times normal speed, according to the rotation speed of
the dial. There are no detents.
• In shuttle mode, the playback speed varies in the range
±20 times normal speed, according to the angular
position of the dial. There is a detent at the center
position, for still image playback.

Display screen

Basic operation screen
a Function menu
Use the PAGE/HOME button to display this menu, and to
switch between the pages (HOME, P1 to P5) of the menu.
Each page has one to six setting items. Press the
corresponding function button to change a setting.
20
Front Panel
1 Function menu
2 Audio input display/audio level meters
• In variable-speed mode, you can make fine adjustments
to the playback speed over the range from –2 to +2 times
normal speed, according to the angular position of the
dial. There is a detent at the center position, for still
image playback.
Regardless of the playback mode, you will normally press
the SHTL/JOG or VAR/JOG button before turning the
dial. But it is also possible to put the unit into shuttle, jog,
or variable-speed mode simply by turning the dial (by
setting setup menu item 101 SELECTION FOR SEARCH
DIAL ENABLE to "dial").
Note
If you do set the above item to "dial", then you should
return the shuttle/jog dial to the center position after
conducting shuttle or variable-speed playback. If you do
not return the dial to the center position, playback in
shuttle or variable-speed mode can start because of
vibrations during other operations.
3 System information
4 Media status display
5 Recording or playback format
6 Clip information
7 Recording or chase play display
8 Time data display area
9 Status display area
For details, see "Basic Operations of the Function Menu"
(page 41).
b Audio input display/audio level meters
Displays information about audio.