Figure 7-1 ET1 in Single-slot USB Docking Cradle
The ET1 charge Battery Charge light emitting diode (LED) indicates the status of the battery charging in the
ET1. See
Table 1-2 Battery Charge LED Status
approximately six hours.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Charging is intelligently controlled by the
ET1. To accomplish this charging, for small periods of time, the ET1 or accessory alternately enables and disables
the battery charging to keep the battery at acceptable temperatures. The ET1 indicates when charging is disabled
due to abnormal temperatures via Battery Charge LED. See
Communication
When the ET1 is connected to a host computer using the Single-slot USB Docking cradle, the ET1 appears as a
Portable Device on the host computer. Refer to the ET1 Enterprise Tablet Integrator Guide for more information.
7.3 Four-slot Charge Only Docking Cradle
The Four-slot Charge Only Docking cradle:
• Provides 12 VDC power for operating the ET1.
• Simultaneously charges up to four ET1 devices.
Charging the ET1 Battery
Insert the ET1 into a slot to begin charging.
MN000022A01 - May 2013
for charging status indications. The battery fully charges in
Table 1-2 Battery Charge LED
7.3 Four-slot Charge Only Docking Cradle
Status.
7-3