Installing The 60-Mm Fan Module; Securing The Server - Fujitsu SPARC ENTERPRISE M4000 Service Manual

10.1.3

Installing the 60-mm Fan Module

Caution – Do not force the fan into the slot. Doing so can cause damage to the fan
and server.
1. Align the fan module (LED on left) and slide the fan into the slot.
A fan module placed backwards into the slot will stop halfway to prevent
damage to the connectors. If the fan does not slide in easily, remove it, and rotate
the fan 180 degrees and then try again.
2. Push down with two fingers to seat the fan module.
10.1.4

Securing the Server

●
Slide the server into the equipment rack and secure the stabilizer bar.
See
10-6 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
"Sliding the Server Into the Equipment Rack" on page 5-4.