Securing The Server - Fujitsu SPARC ENTERPRISE M4000 Service Manual
Fujitsu computer hardware user manual
Hide thumbs
Also See for SPARC ENTERPRISE M4000:
- Reference manual (444 pages) ,
- User manual (376 pages) ,
- Features manual (148 pages)
Table of Contents
Advertisement
6.1.8
Securing the Server
1. Install the fan cover.
This step includes replacing the fan cover, installing the 60-mm fan units, sliding
the server in to the equipment rack and restoring the rack antitilt features to their
original position. See
2. Power the server on.
This step includes reconnecting power cables, verifying the state of the LEDs,
and turning the keyswitch to the Locked position. See
Using Software" on page
Note – If the Solaris automatic booting is set, use the sendbreak -d domain_id
command after the display console banner is displayed but before the system starts
booting the operating system to get the ok prompt.
3. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to
6-8
SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
"Replacing the Fan Cover" on page
4-13.
"Verifying Hardware Operation" on page 4-9
5-10.
"Powering the Server On
for more information.
Advertisement
Table of Contents
