Removing The Cpu Module - Fujitsu SPARC Enterprise M5000 Service Manual

12.1.2

Removing the CPU Module

1. Unlock the levers and raise both levers simultaneously to unseat the CPU
module (
Caution – The bottom of the board tends to swing when it is removed.
2. Remove the CPU module or filler panel from the server and place it on the ESD
mat.
CPU Module Removal
FIGURE 12-3
Caution – Do not stack CPU modules on top of one another or on top of other
components.
).
FIGURE 12-3
Chapter 12 CPU Module Replacement 12-5