Using Cgi Sending; Using The Schedule Task - Sony Ipela SNC-ER585 User Manual

5
Click Start upgrading.
Upgrading starts.
Notes
• To stop upgrading, click Stop upgrading.
To protect some devices, during the process of
upgrading, upgrading cannot be canceled.
• Do not turn off the power until the device restarts after
upgrading.

Using CGI Sending

The CGI Sending function allows you to send CGI to a
device.
How to perform CGI Sending
1
From the Device list, select the camera to receive
CGI.
2
Right click the mouse. Click CGI Sending from
the displayed menu.
The CGI Sending screen is displayed.
3
Enter a command in the CGI command box.
4
Click Send.
The CGI command is sent to the selected camera(s)
in order of ID.
5
When sending is completed, click Save all
responses. Response content of all devices in the
list, to which a CGI command is sent, will be saved
in CSV format.

Using the Schedule Task

You can specify the time or interval to change the Device
setting or perform Firmware upgrade.
108
Using the SNC toolbox
Click Task to display the Task List, which shows a list
of scheduled executable tasks.
Task List
Displays the list of scheduled executable tasks.
Add
Displays the Task Wizard.
Modify
You can edit a task.
Delete
You can delete a task.
Show Detail
Displays the detailed information on a task.
Start
This reserves a task.
Stop
You can cancel a task reservation.
Cancel
Closes the Task List.