When Using Windows Xp Service Pack 2 Or Later - Sony Ipela SNC-ER585 User Manual

11
Set the HTTP port No.
Normally, select 80 for the HTTP port No. To use
another port number, type a port number between
1024 and 65535 in the text box.
Note
When using a port number other than 80, check
with the network administrator first.
12
Confirm that all items are correctly set, then click
OK.
If "Setting OK" is displayed, the IP address is
correctly assigned.
13
When setting is finished, to access the camera
directly, double-click the device name in the list.
The viewer screen of the network camera is
displayed on the Web browser.
Display sample
Note
If the IP address is not set correctly, the viewer does not
appear after step 13. In that case, try to set the IP address
again.
When using Windows XP Service
Pack 2 or later
Installing software
A warning message regarding the active contents may
appear when you install software such as SNC toolbox
from CD-ROM. In this case, operate as follows:
Example: In case of SNC toolbox
If message "Internet Explorer" appears, click Yes.
If the message "File Download – Security Warning"
appears, click Run.
Program name
Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform the
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If the message "Internet Explorer – Security Warning"
appears, click Run.
Program name
The software installation starts.
Assigning the IP Address to the Camera
9