Application Guide
4
CGI command/Syntax
.
4.1. Pan/Tilt/Zoom/Focus Move Command
4.1.1. Direct Move
4.1.1.1 Pan/Tilt
PTZ
Note:
Full and Pan/Tilt users, as well as administrators, can use this command.
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=value,value
EX101
EX101E
Note:
Full and Pan/Tilt users, as well as administrators, can use this command.
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=value,value
Sony Network Camera
ZP550
ZR550
Parameter
left, right, up, down, up-left,
up-right, down-left, or
down-right
Move
1 to 24
(low <-> high)
EX104
EX154
Parameter
left, right, up, down, up-left,
up-right, down-left,
or down-right
Move
1 to 100
(low <-> high)
Pan/Tilt/Zoom/Focus
Value
Sets the direction in which the camera
moves.
Sets the speed at which the camera
moves, in the range of 1 to 24 .
Note:
"0" can also be set. If set, the speed is
automatically adjusted according to the
zoom ratio.
Value
Sets the direction in which the camera
moves.
Sets the speed at which the camera
moves, in the range of 1 to 100.
5
Description
Description
June, 2013 / V3.1