Using Cgi Sending - Sony Ipela Application Manual

Device list Module list
Tip
The Firmware Upgrade screen can also be displayed
using the following method:
• Select Firmware Upgrade from the Tools menu.
Device list
Select the device to upgrade.
A progress bar is displayed when upgrading is in
process.
The status field shows current status.
Module list
To display the dialog, click the Browse button to the
right of the model (in the module list) to upgrade. Select
the target SVU file from the dialog.
You can select one file for each model.
Upgrading
1
Set the order to perform device upgrading using Up
and Down.
2
Click Browse and select an upgrade file for each
model.
3
Select how many devices to upgrade in Paralleled
upgrade quantity.
4
To back up the device setting, check Backup
device setting.
Tip
You can specify the backup folder under Device setting
backup folder, on the General tab in Option from the
Tools menu.
12
Using the SNC toolbox
5
Click Start upgrading.
Upgrading starts.
Notes
• To stop upgrading, click Stop upgrading.
To protect some devices, during the process of
upgrading, upgrading cannot be canceled.
• Do not turn off the power until the device restarts after
upgrading.

Using CGI Sending

The CGI Sending function allows you to send CGI to a
device.
How to perform CGI Sending
1
From the Device list, select the camera to receive
CGI.
2
Right click the mouse. Click CGI Sending from
the displayed menu.
The CGI Sending screen is displayed.
3
Enter a command in the CGI command box.
4
Click Send.
The CGI command is sent to the selected camera(s)
in order of ID.
5
When sending is completed, click Save all
responses. Response content of all devices in the
list, to which a CGI command is sent, will be saved
in CSV format.