Operating The Camera; Controlling Via The Control Panel (Operation Common To Area Zoom Mode And Vector Dragging Mode) - Sony Ipela SNC-ER585 User Manual
User manual (sncer585 user guide)
Hide thumbs
Also See for Ipela SNC-ER585:
- Specification sheet (2 pages) ,
- Installation manual (2 pages) ,
- User manual (99 pages)
Table of Contents
Advertisement
Exclusive control button
Displays the remaining time for operation
authority. However, if operation authority was not
obtained, the waiting time is displayed.
Note
Set the Exclusive control mode in the System Tab of
System Menu to On to perform exclusive control
(page 37).
Camera list
The camera list is displayed when Camera list is set to
On in the viewer menu (page 95), and at least one
camera is registered.
Operating the Camera
There are three modes of camera operation: Area zoom
mode, Vector dragging mode and PTZ Control bar.
You can control pan/tilt, zoom and focus in either mode.
The available functions for the camera operation modes
vary according to the viewer display. The available
functions are as follows:
Plug-in free viewer
ActiveX
JPEG
JPEG/
ActiveX
viewer
Flash
×
×
×
Operation from
a
control panel
Area zoom
a
a
a
a
Vector dragging
a
a
a
a
×
×
PTZ control bar
a
a
Controlling via the control panel
(Operation common to Area zoom
mode and Vector dragging mode)
You can operate the camera direction, zoom, and focus
by using the control panel for the monitor image
currently displayed.
Pan/Tilt control
Click the arrow button in the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.
To return to the home position, click
.
Notes
• When you hold
,
or
to tilt the camera
downward to the point where it faces the ground with
Auto flip set to On (page 38), the auto flip function is
activated to change the tilt movement upward.
Page 26
Hide quick links:
Advertisement
Table of Contents
