Backup Setting Data; Restore Setting; Format Sd Memory Card - Sony Ipela SNC-ER585 User Manual

button on the camera. For details, see the supplied
Installation Manual.

Backup setting data

Saves the setting data of the camera in a file.
Click Save, and follow the instructions on the Web
browser to specify the folder and save the setting data of
the camera.
The file name preset at the factory is "snc-ep520.cfg" for
SNC-EP520.

Restore setting

Loads the stored setting data of the camera.
Click Browse and select the file in which the setting data
is stored. Click OK, and the camera is adjusted
according to the loaded data, and restarted.
Restore preset position and privacy masking
settings
If you select this, the stored setting data of the camera,
the preset position data and privacy masking data are
loaded.
Notes
• With Restore setting, some items in the Network
menu (page 52) cannot be restored.
• When Restore preset position and privacy masking
settings is selected, loading of setting data may take
some time.
• The following items cannot be stored or restored with
Backup setting data or Restore setting.
– audio files uploaded using SNC audio upload tool
– a panorama image recorded in the camera using
Panorama Creator of SNC toolbox
– a homepage created using Custom Homepage of
SNC toolbox
– a client certificate and CA certificate to be used in
the 802.1X authentication function
– Thumbnail
– Header logo
– Camera ID image
Video & PT drive refresh (SNC-ER520/
ER521/ER550/ER580/ER585/ER585H/
ZR550)
Image distortion and misalignment of the pan/tilt
position may occur during extended periods of use.
Select On to correct image distortion and pan/tilt
misalignment.
Video & PT drive refresh takes about 20 seconds to
complete. Pan/tilt operations for the camera are
performed automatically during the refresh operation.
After refresh is completed, the pan/tilt position returns
to that at the start of the refresh operation.
42
Configuring the System — System Menu
Manual
Click Refresh, and panning and tilting starts
automatically.
Schedule
Refresh interval
The refresh interval for the video & PT drive should
be set periodically. The interval can be set between
30 minutes and 24 hours (one day).
Available period of time
Set the time period within which video & PT drive
refresh can be performed.
Always: Video & PT drive refresh is always
performed.
Specify: Video & PT drive refresh can be set to a
preferred schedule.
Click Schedule. The Menu for period setting
can be displayed. ("Setting the Schedule —
Schedule Menu" on page 88)
Notes
• Camera operation can be canceled when you run video
& PT drive refresh while operating the camera.
• Position tours stop if video & PT drive refresh is
running while you are running position tours. After
video & PT drive refresh has been completed, the
position tours restart.
• Intelligent motion detection and camera tampering
detection stop immediately if you execute video & PT
drive refresh when Intelligent motion detection and
camera tampering detection are set. After video & PT
drive refresh is completed, motion detection and
camera tampering detection restart.

Format SD memory card

Click Format to format the SD memory card (not
supplied) inserted into the SD memory card slot of the
camera. The files and folders stored in the SD memory
card are deleted while formatting.