Communicating With External Devices - Ptz Control I/F Menu (Snc-Zp550/Zr550) - Sony Ipela SNC-ER585 User Manual

OK/Cancel
See "Buttons common to every menu" on page 35.
Communicating with
external devices - PTZ
control I/F menu (SNC-
ZP550/ZR550)
Click PTZ control I/F in the Administrator menu to
display the PTZ control I/F menu.
Using this menu, you can configure settings to receive
control signals from IPELA HYBRID-compatible
devices (receiver, DVR, etc.).
This unit's pan, tilt and zoom, etc., functions can be
controlled from a keyboard connected to an IPELA
HYBRID-compatible device.
TCP port No.
Enter the number of the port for control signal reception.
Specify a port number (1024 to 65535) that is not
commonly used.
To receive control signals, you need to configure the
settings of the IPELA HYBRID-compatible device. For
details, refer to the manual of the corresponding device.
For IPELA HYBRID-compatible devices, contact your
authorized Sony dealer.

Communicating with external devices - PTZ control I/F menu (SNC-ZP550/ZR550)

93