White Balance; Slow Shutter; Shutter Speed - Sony Ipela SNC-ER585 User Manual

Slow shutter

Set the slow shutter. When On is selected, the auto
exposure setting including long term exposure is set to
compensate for the brightness of a scene.
Note
When DynaView is set to On, Slow shutter cannot be
activated.

Shutter speed

Select the camera shutter speed from the drop-down list.
Selectable shutter speed values are as follows:
SNC-EP520/ER520
1/10000, 1/6000, 1/4000, 1/3000, 1/2000, 1/1500, 1/
1000, 1/725, 1/500, 1/350, 1/250, 1/180, 1/125, 1/
100, 1/90, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2, 1/1
SNC-EP521/ER521
1/10000, 1/6000, 1/3500, 1/2500, 1/1750, 1/1250, 1/
1000, 1/600, 1/425, 1/300, 1/215, 1/150, 1/120, 1/
100, 1/75, 1/50, 1/25, 1/12, 1/6, 1/3, 1/2, 1/1
When 30 fps is selected in the camera operating
mode of SNC-EP550/EP580/ER550/ER580/
ER585/ER585H/ZP550/ZR550
1/10000, 1/6000, 1/4000, 1/3000, 1/2000, 1/1500, 1/
1000, 1/725, 1/500, 1/350, 1/250, 1/180, 1/125, 1/
100, 1/90, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2, 1/1
When 25 fps is selected in the camera operating
mode of SNC-EP550/EP580/ER550/ER580/
ER585/ER585H/ZP550/ZR550
1/10000, 1/6000, 1/3500, 1/2500, 1/1750, 1/1250, 1/
1000, 1/600, 1/425, 1/300, 1/215, 1/150, 1/120, 1/
100, 1/75, 1/50, 1/25, 1/12, 1/6, 1/3, 1/2, 1/1
The camera operating mode can be changed on the
Installation tab in the System menu.
Note
If the shutter speed is set to slower than 1/30, the
DynaView function cannot be activated.
Iris
Select the iris from the drop-down list.
Selectable iris values are as follows:
SNC-EP520/EP521/ER520/ER521
F1.6, F2, F2.4, F2.8, F3.4, F4, F4.8, F5.6, F6.8, F8,
F9.6, F11, F14, F16, F19, F22, F28, CLOSE
SNC-EP550/ER550/ZP550/ZR550
F1.4, F1.6, F2, F2.4, F2.8, F3.4, F4, F4.8, F5.6, F6.8,
F8, F9.6, F11, F14, F16, CLOSE
SNC-EP580/ER580/ER585/ER585H
F1.6, F2, F2.4, F2.8, F3.4, F4, F4.8, F5.6, F6.8, F8,
F9.6, F11, F14, CLOSE
46
Setting the Camera Image and Audio — Camera Menu
Gain
Select the gain from the drop-down list.
Selectable gain values are as follows:
-3, 0, +2, +4, +6, +8, +10, +12, +14, +16, +18, +20,
+22, +24, +26, +28 (dB)

White balance

Select the white balance mode.
Auto: Automatically adjusts the color to be closest to
the image you are viewing (approximately 3000 K to
7500 K).
Advanced Auto: Automatically adjusts the color to be
closest to the image you are viewing. When
performing photography under a high-pressure
sodium vapor lamp, the unit automatically switches
to Sodium vapor lamp mode.
Indoor: Adjusts the white balance for shooting indoors
under incandescent lighting (about 3200 K).
Outdoor: Adjusts the white balance for shooting
outdoors (about 5800 K).
One push WB: The One push trigger button becomes
active. Click the button to adjust the white balance
instantly.
ATW: Eliminating the influences causing from the
environmental illumination or lights, adjust the white
balance automatically to reproduce the original color
of the objects. (approximately 2000 K to 10000 K).
Manual: When this option is selected, R gain and B
gain become active. Selectable gain values are from
0 to 255.
Sodium vapor lamp: Sets the white balance to that
suitable for photography under a high-pressure
sodium vapor lamp.
Notes
• High-pressure sodium lamps are supported. Proper
white balance may not be captured for some subjects
when using low-pressure sodium lamps.
• In Advanced Auto mode, proper white balance may
not be captured for some subjects or with some light
sources.
NR
Image noise can be reduced by using the NR function.
The intensity of the Noise Reduction filter can be
selected among High, Middle and Low. If you do not
use this function, select Off.
Brightness (SNC-EP520/EP521/ER520/
ER521)
Fine adjust the brightness for the exposure set in the
exposure mode. A larger value brightens the image, and
a smaller value darkens the image. A value from –5 to +5
can be set.